FORGOT YOUR DETAILS?

Penetrar - Multi-purpose Concrete Primer & Binding agent

ENHANCES SUBSTRATE & ADHESION

PENETRAR

MULTI-PURPOSE CONCRETE
PRIMER & BINDING AGENT

 

Appearance

White Milky Liquid

Covarage

6m² per litre per coat

Available Sizes

Penetrar is a multi-purpose co-polymer ready-to-use concrete primer & binding agent. It exhibits extreme penetration and binding capabilities specifically in cementitious substrates. It binds dustiness & hardens the substrate, promoting adhesion for waterproofing & paint systems.

Penetrar can be diluted with water up to 7 times, but what needs to be taken into consideration is the layer for layer application. Up to 6 applications of this mixture might be needed. It will be at the discretion of the applicator at what point the substrate has properly bonded and no further dustiness appears. This dilution has been tested vigorously on concrete surfaces that are dense or extremely powdery with great success.

Usage

Penetrar can be used as a primer for all waterproofing systems and paint work on cementitious substrates.

Binds & enhances screeds with a powdery surface before applying a waterproofing system or tiling.

Consolidation of surfaces for cementitious renders, concrete work, masonry work and plaster.

Anti-dust primer for cementitious surfaces, internal brick walls and ceilings.

Penetrar can be used as a concrete floor sealer. Depending on the number of coats applied the application can be matt to semi-gloss.

HOW IT WORKS

MULTI-PURPOSE CONCRETE PRIMER

Penetrar is a multi-purpose concrete primer. It will consolidate and improve the characteristics of weak, brittle or powdery surfaces. It can be used as a priming agent to bind dustiness and enhance the substrate. It improves adhesion to the substrates for waterproofing and paint systems. Penetrar has high penetration characteristics, even on surfaces with low porosity. The binding properties prevent the release of any dust or particles from the concrete substrate onto which it has been applied. As the success of Penetrar lies in the depth of penetration through capillary action it is advised to wet the surface to which the product needs to be applied before commencing with the application, even when diluted up to 7 times. Avoid ponding water, brush off excess water from concrete surfaces or screeds. Working on vertical surfaces it is advisable to let it dry to a damp state. Application of Penetrar to vertical surfaces can be less labour-intensive using a low-pressure spray method.

SEE HOW PENETRAR IS USED IN SYSTEMS

KEY BENEFITS

Penetrar - Multi-purpose Concrete Primer & Binding agent

1/ MULTI-PURPOSE CONCRETE PRIMER & BINDING AGENT

Penetrar is applied to concrete work, masonry work and plaster in most cases and can be used as a primer for all waterproofing and paint systems.

2/ ENHANCES SUBSTRATE & PROMOTE ADHESION

Penetrar exhibits extreme penetration and binding capabilities specifically in cementitious substrates. Can be used to stabilise friable or dusty cementitious surfaces or to consolidate unsound substrates.

3/ EASY APPLICATION & FAST DRYING

Penetrar is non-flammable, water-resistant & UV stable. It can be applied by brush, roller or spray. It is a milky white liquid substance but dries to a clear film when fully cured.

4/ ECO-FRIENDLY

Environmentally friendly, water-based coating contains no toxic solvent and/or chemicals. It is virtually odourless and has a Low VOC <1 %

GETTING STARTED

COLOUR & APPLICATION

STANDARD COLOURS

This product is available on the shelf in carefully selected classic standard colours for your convenience.*

White / Milky

(*) Disclaimer

While SealPro makes every effort to ensure that colours shown on this website, match paint colours as closely as possible, variations may occur due to a variety of factors. Always paint a test patch of the selected colour on your wall. For consistency of sheen and colour, always check that paint containers carry the same batch number.

APPLICATION

Brush, roller or airless spray. Touch dry in 1-2 hours. Re-coat after 6-12 hours

CASE STUDIES

PENETRAR AT WORK

The characteristics of Penetrar allows it to be used on any concrete, brickwork or plastered substrates as a priming and/or binding agent. With strong penetrating action, it consolidates porous surfaces and unsound screeds and plaster. Penetrar also eliminates dust and powder on substrates, giving them good mechanical strength and enhanced adhesion.

TILE ROOF RIDGE MAINTENANCE

As HydroSeal HF exhibits high flexibility it could be used to do waterproofing on the screws, joints, overlaps and ridging where extreme movement is expected especially on metal roofs, and due to its durability, double up as a roof paint.

CONCRETE SLAB SPORT COURT PAINT APPLICATION

The concrete slab provided as a Sport Court was extremely dusty and had no bonding up to 3mm in depth. The surface had zero penetrating ability or adhesion. The slab was sprayed with water over a period to ensure the surface is properly wetted. Excess water ponding was removed. Penetrar was diluted 1:7 and applied 6 times before proper bonding took place. Once the layers had cured the slab was stable and the surface strength was increased. No further crumbling or dustiness was visible, and the application of paint could commence. The project proved successful as no further delamination of the paint layer took place.

WORK WITH US

Let our technical support team help you find the right solution for your application.

SPECIFICATIONS

EVERYTHING YOU NEED TO KNOW.

Penetrar Product Information

1/ PRODUCT INFORMATION

Downloadable product information data sheets.

Download PDF (0.60 Mb)

Penetrar Application Mrthod

2/ APPLICATION METHOD

Downloadable product method statement.

Download PDF (0.54 Mb)

TIPS & ADVICE

STILL, HAVE SOME QUESTIONS?

It is recommended that Penetrar be used as a primer or bonding agent in all SealPro’s application systems. Before using Penetrar ensure the substrate is wetted and dries to a damp state. Remove ponding water on flat surfaces.

Inferior plaster work will be enhanced and strengthened by applying Penetrar. The number of layers and the dilution ratio will be at the discretion of the applicator. It is vital that proper penetration is achieved and that Penetrar does not film form over the substrate.

Using Penetrar on concrete proves successful to enhance strength and increasing the adhesion capability of the waterproofing or paint system.

CONTACT

NEED TO KNOW MORE?

LET'S TALK.

The success of any project depends on the type of product and the correct application of the solution. The SealPro technical support team has experience in all specialised coatings we supply and can help you to find the correct product & solution for your application.

+27 60 997 6364

Monday to Friday.
7:30 am to 4:30 pm.

REQUEST A FREE WATERPROOFING OR PAINTING QUOTE

Please fill in this form and we'll get back to you as soon as possible!

GET OUR SPECIALS 1ST!

Sign up to receive the latest offers and news from our industry.

Stay on top of new products, specials and offerings we might have. Sign up today.

TOP